Festplatte kaputt ?

[Siodloufj]

Ich brauche Hilfe zur Interpretation zweier Festplatten! HDDLife sacht was von 50% Health

-----------------------------------------------------------------------
CrystalDiskMark 6.0.0 x64 (C) 2007-2017 hiyohiyo
Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 70.778 MB/s
Sequential Write (Q= 32,T= 1) : 63.628 MB/s
Random Read 4KiB (Q= 8,T= 8) : 1.708 MB/s [ 417.0 IOPS]
Random Write 4KiB (Q= 8,T= 8) : 0.560 MB/s [ 136.7 IOPS]
Random Read 4KiB (Q= 32,T= 1) : 1.659 MB/s [ 405.0 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 0.519 MB/s [ 126.7 IOPS]
Random Read 4KiB (Q= 1,T= 1) : 0.637 MB/s [ 155.5 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 0.481 MB/s [ 117.4 IOPS]

Test : 1024 MiB [E: 36.4% (169.6/465.8 GiB)] (x2) [Interval=1 sec]
Date : 2017/12/19 6:09:25
OS : Windows 10 [10.0 Build 16299] (x64)



-----------------------------------------------------------------------
CrystalDiskMark 6.0.0 x64 (C) 2007-2017 hiyohiyo
Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 117.469 MB/s
Sequential Write (Q= 32,T= 1) : 111.337 MB/s
Random Read 4KiB (Q= 8,T= 8) : 1.108 MB/s [ 270.5 IOPS]
Random Write 4KiB (Q= 8,T= 8) : 1.490 MB/s [ 363.8 IOPS]
Random Read 4KiB (Q= 32,T= 1) : 1.162 MB/s [ 283.7 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 1.459 MB/s [ 356.2 IOPS]
Random Read 4KiB (Q= 1,T= 1) : 0.325 MB/s [ 79.3 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 1.383 MB/s [ 337.6 IOPS]

Test : 1024 MiB [D: 41.1% (191.7/465.8 GiB)] (x2) [Interval=1 sec]
Date : 2017/12/19 6:13:18
OS : Windows 10 [10.0 Build 16299] (x64)

[Tante Google]

[hib]

Ich brauche Hilfe zur Interpretation zweier Festplatten! HDDLife sacht was von 50% Health

Da gibt es nichts zu interpretieren, die Tabellen sagen nur was gemacht wurde und die Ergebnisse, keine Fehler.

Wenn Du wissen willst ob eine Festplatte noch OK ist oder nicht, dann musst Du die Smartwerte auslesen.
Ich benutze dazu immer Speccy.